Tests on Steel Materials |
TEST | STANDARDS |
Tension Testing of Metallic Materials |
ASTM-E8 |
Compression Testing of Metallic Materials |
ASTM-E9 |
Mechanical Testing of Steel Products |
ASTM-A370 |
Load Verification of Testing Machines |
ASTM-E4 |
Calibration of Force Testing Machines |
ASTM-E74-95 |
R Value for Sheet Metal |
ASTM-E517 |
N Value for SheeT Metal |
ASTM-E646 |
Pendulum Impact Tests |
ASTM-E23 |
Falling Weight Impact Tests |
ASTM-E436, ASTM-E208 |
Tensile Properties of Aluminum |
ASTM-B557 |
Tension Testing of Metallic Foil |
ASTM-E345 |
Test Method for Fasteners, Washers & Rivets |
ASTM-F606 |
Physical Tests |
TEST | STANDARDS |
Test Method for the Plastic Deformation of Sheet Metal |
ASTM E517 |
Test Method for Impact Tests on Metals with a Notched Sample |
ASTM E23 |
Standard Practice for Operating Salt Spray (Fog) Aparatus |
ASTM B117 |
Hardness |
TEST | STANDARDS |
Rockwell Hardness Test |
ASTM E18, NMX-057-1997 |
Brinell Hardness Test |
ASTM E-10 |
Vickers Hardness Test |
ASTM E-92, ASTM E-1327, ASTM E384 |
Spectrographic Analysis |
TEST |
STANDARDS |
Test Method for Oprtical Emission Vacuum Spectrometric Analysis of Carbon and Low Alloy Steel |
ASTM E-45 |
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry |
ASTM E1251 |
Preparación de Muestras Metalográficas |
TEST |
STANDARDS |
Guide for Preparation of Metallographic Specimens |
ASTM E3 |
Grain Size |
ASTM E112 |
Inclusion Rating |
AST E-45 |
Tests on Plastic Materials |
TEST |
STANDARDS |
Tensile Properties of Plastics |
ASTM-D638, DIN 53444 |
DIN 53452, DIN 53441 |
Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
ASTM-D882 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ASTM-D-790 |
Compressive Properties of Rigid Plastics |
ASTM-D695 |
Standard Test Methods for Vulcanized Rubber and Thermoplatic Elastomers-Tension |
ASTM D412 |
Compression Test of Rubber |
ASTM D575 |
Impact Pendulum (Izod and Charpy) |
ASTM-D256, ISO 179, ISO 180 |
DIN 51230 |
DIN 53753, DIN 53448 |
Ball Drop Impact Tests |
ASTM-D709, ASTM-D1992
|
Several |
TEST | STANDARDS |
Salt Fog Test |
ASTM-B-117 |
Salt Fog Test |
ASTM-B-368 |
Humidity Test |
ASTM-B-380 |
Salt Fog and Humidity Test |
ASTM-D-2247 |
Salt Humidity Test |
ASTM-D-1735 |
Fog Test S02 / Kresternich |
ASTM-G-85 Anmx 1 |
Salt Fog Test |
ASTM-G-87 |
Peeled by Adhesvie Bark Drum Test |
ASTM-D-1781 |
Tearing Wires and Cables Test |
ASTM-D-470 |
Resistance of construction materials |
TEST | STANDARDS |
Bending Concrete Test |
ASTM-C-293 |
Compression of Concrete Cylinder Tests |
ASTM-C-39 |
Concrete of Concrete Tests |
ASTM-C-469 |
Compression of Concrete Tests (fatigue) |
ASTM-C-512 |
Textile Material Resistance |
TEST | STANDARDS |
Tension and Elongation Tests in Textile |
ASTM-D-1682 |
Resistance Test of Rupture of Pants (textiles) |
ASTM-D-1938 |
Resistance Test of Rupture of Textiles |
ASTM-D-2261 |
Tension Test for Cutting in Adhesives |
ASTM-D-2295 |
Resistance Test in Yarn Slip |
ASTM-D-434 |
Force Test in Geo Textiles |
ASTM-D-4533 |
Chemical Tests |
TEST | STANDARDS |
Standard Method for Analysis of Cast Iron with Atomic Emission Spectrometer |
ASTM E1999 |
Standard Method for Analysis of Austenitic Stainless Steel by Spark Atomic Absoption Spectrometer |
ASTM E1086 |
Standard Method for Analysis of Carbon and Low Alloy Steel by Atomic Absoption Spectrometer |
ASTM E415 |