| Tests on Steel Materials |
|---|
| TEST | STANDARDS |
|---|
| Tension Testing of Metallic Materials |
ASTM-E8 |
| Compression Testing of Metallic Materials |
ASTM-E9 |
| Mechanical Testing of Steel Products |
ASTM-A370 |
| Load Verification of Testing Machines |
ASTM-E4 |
| Calibration of Force Testing Machines |
ASTM-E74-95 |
| R Value for Sheet Metal |
ASTM-E517 |
| N Value for SheeT Metal |
ASTM-E646 |
| Pendulum Impact Tests |
ASTM-E23 |
| Falling Weight Impact Tests |
ASTM-E436, ASTM-E208 |
| Tensile Properties of Aluminum |
ASTM-B557 |
| Tension Testing of Metallic Foil |
ASTM-E345 |
| Test Method for Fasteners, Washers & Rivets |
ASTM-F606 |
| Physical Tests |
|---|
| TEST | STANDARDS |
|---|
| Test Method for the Plastic Deformation of Sheet Metal |
ASTM E517 |
| Test Method for Impact Tests on Metals with a Notched Sample |
ASTM E23 |
| Standard Practice for Operating Salt Spray (Fog) Aparatus |
ASTM B117 |
| Hardness |
|---|
| TEST | STANDARDS |
|---|
| Rockwell Hardness Test |
ASTM E18, NMX-057-1997 |
| Brinell Hardness Test |
ASTM E-10 |
| Vickers Hardness Test |
ASTM E-92, ASTM E-1327, ASTM E384 |
| Spectrographic Analysis |
|---|
| TEST |
STANDARDS |
| Test Method for Oprtical Emission Vacuum Spectrometric Analysis of Carbon and Low Alloy Steel |
ASTM E-45 |
| Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry |
ASTM E1251 |
| Preparación de Muestras Metalográficas |
| TEST |
STANDARDS |
| Guide for Preparation of Metallographic Specimens |
ASTM E3 |
| Grain Size |
ASTM E112 |
| Inclusion Rating |
AST E-45 |
| Tests on Plastic Materials |
| TEST |
STANDARDS |
| Tensile Properties of Plastics |
ASTM-D638, DIN 53444 |
| DIN 53452, DIN 53441 |
| Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
ASTM-D882 |
| Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ASTM-D-790 |
| Compressive Properties of Rigid Plastics |
ASTM-D695 |
| Standard Test Methods for Vulcanized Rubber and Thermoplatic Elastomers-Tension |
ASTM D412 |
| Compression Test of Rubber |
ASTM D575 |
| Impact Pendulum (Izod and Charpy) |
ASTM-D256, ISO 179, ISO 180 |
| DIN 51230 |
| DIN 53753, DIN 53448 |
| Ball Drop Impact Tests |
ASTM-D709, ASTM-D1992
|
| Several |
|---|
| TEST | STANDARDS |
|---|
| Salt Fog Test |
ASTM-B-117 |
| Salt Fog Test |
ASTM-B-368 |
| Humidity Test |
ASTM-B-380 |
| Salt Fog and Humidity Test |
ASTM-D-2247 |
| Salt Humidity Test |
ASTM-D-1735 |
| Fog Test S02 / Kresternich |
ASTM-G-85 Anmx 1 |
| Salt Fog Test |
ASTM-G-87 |
| Peeled by Adhesvie Bark Drum Test |
ASTM-D-1781 |
| Tearing Wires and Cables Test |
ASTM-D-470 |
| Resistance of construction materials |
|---|
| TEST | STANDARDS |
|---|
| Bending Concrete Test |
ASTM-C-293 |
| Compression of Concrete Cylinder Tests |
ASTM-C-39 |
| Concrete of Concrete Tests |
ASTM-C-469 |
| Compression of Concrete Tests (fatigue) |
ASTM-C-512 |
| Textile Material Resistance |
|---|
| TEST | STANDARDS |
|---|
| Tension and Elongation Tests in Textile |
ASTM-D-1682 |
| Resistance Test of Rupture of Pants (textiles) |
ASTM-D-1938 |
| Resistance Test of Rupture of Textiles |
ASTM-D-2261 |
| Tension Test for Cutting in Adhesives |
ASTM-D-2295 |
| Resistance Test in Yarn Slip |
ASTM-D-434 |
| Force Test in Geo Textiles |
ASTM-D-4533 |
| Chemical Tests |
|---|
| TEST | STANDARDS |
|---|
| Standard Method for Analysis of Cast Iron with Atomic Emission Spectrometer |
ASTM E1999 |
| Standard Method for Analysis of Austenitic Stainless Steel by Spark Atomic Absoption Spectrometer |
ASTM E1086 |
| Standard Method for Analysis of Carbon and Low Alloy Steel by Atomic Absoption Spectrometer |
ASTM E415 |
