Twin Belt Grinder - WET

For flat Coarse grinding prior to fine grinding. 

The specimens to be ground in 60,80 or 120 grit after cutting or moulding operation to remove surface imperfections. 

Useful step to remove light metallurgical damage in the specimen surface induced during cut-off operation.

• Two grinding belts, Water cooling mechanism belt centering,
• Anticorrosion M.S Base with powder coated SS cover
• Grinding belts: 100X915 mm
• Spindle Speed 1400 rpm
• Electrical Interlock System, Water Connection 1xR 1/2" ant recirculation
• Water Valve: Right & Left
• Dimension .WxHxD 630 x 250 x 520 mm
• T-slot table, Cam Vise